Table of Contents
An electric drill with rechargeable batteries is known as a cordless drill. Drills like Porter Cable Cordless Drill are typically used to drill circular holes in materials, as well as to insert screws and other threaded fasteners.
Impact driver drills, which are high-torque instruments typically used for driving screws and tightening nuts, are also available. When pushing larger fasteners or into harder, denser materials, impact drivers can be extremely effective.
Rechargeable batteries are used in cordless drills, allowing the user to snap in a battery pack and have instant drill power without the need for a power cord.
Uses of Cordless Drills
While these cordless drills can be used for a variety of tasks, some are more common than others. The cordless drill, perhaps the most flexible equipment in the carpenter’s inventory, drastically reduces the amount of labor required to finish numerous projects.
You may use your cordless drill anywhere as long as the battery pack is fully charged; you don’t need to be near an electrical outlet.
Replacing out the screwdriver
Attaching and assembling are two of the most common uses for the cordless drill. The craftsman can use a screw bit to place a screw on the end of the bit and rapidly insert it into the project.
The cordless drill driver can revolve counterclockwise with the flip of a switch, making it useful for both removing and inserting screws.
Pilot holes
A cordless drill with a bit one size smaller than the diameter of your screw allows you to drill a pilot hole before placing the screw into wood that may split. This is useful in finish carpentry, where even a minor split can detract from the item’s overall quality.
A screw has a tendency to split wood because it burrows into it and splits the grain. This is especially true if the screw is large. However, you can insert the screw and reduce wood splits by drilling a pilot hole first.
Hole saw
For cutting out holes for doorknobs, sink faucet drains, and other circular holes, use your cordless drill as a saw. Hole saw-bits come in a variety of diameters and attach to the cordless drill, allowing the instrument to cut off a perfectly round circle for you.
Drywall installation
For easy access, drywall installers wear cordless drills on their tool belts. Lifting and holding huge panels in place before placing drywall screws into the studs beneath the wall is required while installing drywall.
With one hand bracing the panel, the installer may easily insert the screw through the drywall with his cordless drill, which is equipped with a magnetic screw tip.
Furthermore, by using a cordless drill you will have no interference with tangling cords, and you will be able to work in tight and enclosed areas deprived of any inconveniences.
About Porter-Cable Cordless Drill
However, there are so many cordless drills available in the market today. So. Choosing the best drill that meets your requirements and budget can be quite a daunting task.
Well, in today’s article, we are going to have a closer look at one of the PORTER-CABLE cordless drills. Especially if you’re new to cordless drills and don’t know what to look for, including relevant features and qualities.
See Where PORTER-CABLE PCCK604L2 Cordless Drill Ranks in Our Best Cordless Drill 2021
PORTER-CABLE PCCK604L2 Drill/driver
This assessment of the PORTER-CABLE PCCK604L2 drill/driver will show you how to choose the best cordless drill. When selecting the ideal drill, a few criteria must be taken into account.
To begin, consider power – take a look at your power drill’s engine. If you want to utilize a cordless drill for heavy-duty work, we recommend choosing one with a high RPM.
The PORTER-CABLE PCCK604L2 is the best driver combo kit for the money. This multi-tool has a lot of power and lengthy battery life. Even for heavy-duty DIY jobs, this machine stands out on its own.
It includes magnetic bit holders on the top of the unit, which are quite useful. It also has Lithium-ion batteries with a voltage of 20 volts. And for a ridiculously low price, you get two unique instruments that can help you solve any problems you might have while working on your house.
Variable Speed Included
One feature we appreciated about the PORTER-CABLE PCCK604L2 is the variable speed control, which allows you to drill/drive in a variety of materials. Despite having variable speed control, this power tool only has a two-speed transmission. Under no-load conditions, this tiny cordless drill may reach 1500 maximum RPM.
This Porter-Cable drill has a low-speed range of 0-450RPM. You may choose the appropriate speed for the surface you’re working on, ensuring that you don’t harm anything. Overall, there isn’t much of a performance difference between Dewalt and Porter Cable drills.
Two-Speed Settings
Furthermore, the PORTER-CABLE PCCK600 has two-speed settings: low gear 0-400RPM and high gear 0-1600RPM.
In practice, the PORTER-CABLE PCCK604L2 will not be as quick as the drill included in the Porter-Cable PCCK600 combo kit. But that doesn’t negate the fact that it’s capable of getting the job done in any situation.
This Porter-Cable cordless drill also has a clutch option that allows you to quickly switch between high and low-speed settings. You won’t have to remove your hand off the handle to adjust the speed because the trigger is conveniently located on the unit.
Instead, if you desire modest speed, you simply need to lightly press the trigger; if you press the trigger harder, the drill’s speed will increase.
Powerful 20V MAX Lithium-Ion Batteries
A drill and a driver are included in this Porter-Cable combo set. Both tools come with 20-volt lithium-ion batteries that can supply 283 watts of electricity. You’ll see that the Porter-Cable drill performs somewhat worse because DeWalt offers up to 300 watts of power.
Although this Porter-Cable combo kit isn’t the most powerful drill/driver on the market, it provides more than enough power for most tasks.
This combo kit’s two 20-volt Lithium-Ion (Li-Ion) batteries have a capacity of roughly 1.3Ah. These batteries are lighter and offer a longer runtime than regular NiCd batteries.
This power tool also has a 1/4-inch impact driver and can generate up to 1450 in. lbs of torque, which is higher than the Makita cordless drills. It also has a top speed of 0-2800 RPM and 0-3100 BPM, making it excellent for every drilling and driving work you may have. The clutch settings can be used to change the torque that is applied.
This combo kit’s two 20-volt Lithium-Ion (Li-Ion) batteries have a capacity of roughly 1.3Ah. These batteries are lighter and offer a longer runtime than regular NiCd batteries.
Size and Weight
When compared to DeWalt and Makita cordless drills, the impact driver is slightly heavier at 3.3 pounds and 6.9 inches long, making it one of the most significant drivers.
Most people choose Porter Cable tools because they are snugly built – this unit has a very soft and comfortable handle that makes working in tight and enclosed locations much simpler without becoming exhausted.
Recommended for You: Best Cordless Hedge Trimmers for Large Hedges
Additional Features
It has a 1/2-inch keyless metal ratcheting chuck that provides excellent bit control. You won’t have to worry about losing pieces when replacing them because it contains a convenient bit storage compartment. It also features a belt loop on which you may store bits and other attachments.
This drill also comes with built-in LED lights that illuminate the area in front of the drill, allowing you to see what you’re drilling even in low-light conditions. In addition, this power tool has a 24-position slip clutch.
It is more than twice as many as the Black and Decker drills. It comes with a kit bag, which is ideal for storing the tools included in this combo package.
Porter-Cable Cordless Drill PCCK604L2 Full Specifications
- Brand: PORTER-CABLE
- Product Weight: 5 lbs
- Product Length: 8.8 inches
- Capacity: 1.3 AH
- Battery Size: 1.3 AH
- Battery Type: Lithium-Ion
- Chuck Type: Precision Keyless
- Corded or Cordless: Cordless
- Country of Origin: Imported
- Drive Size: 1/2 in.
- Handle Material: Rubber Overmold
- Head Material: Metal
- Impacts Per Minute: 0-3,100 IPM
- Lock-On Switch: Yes
- Chuck Size: 0.5 in.
- Max Speed: 1,500 rpm
- Maximum Torque: 1,450 in.-lbs.
- No Load RPM: 1,500 rpm
- Number of Clutch Settings: 11
- Number of Speeds: 2
- Power Type: Battery
- Product Height: 12.5 in.
- Product Width: 7.5 in.
- Switch Type: Trigger
- Torque: 3,100 BPM
- Variable Speed: Yes
- Voltage: 20V
What We Like About Porter-Cable Cordless Drill PCCK604L2
- Both tools are small and light, making them less tiring to use.
- The impact mechanism is exceptional, delivering 1450 in. Lbs at 2800 ROM and 3100 BPM.
- The motor is capable of producing 1500 RPM.
- It’s powered by 20-volt lithium-ion batteries, which give it longer battery life.
- When in use, the non-slip handle provides a superior grip.
- Drilling precision is enhanced with variable-speed triggers.
- When operating in low-light circumstances, LED lights provide illumination.
What We Don’t Like About Porter-Cable Cordless Drill PCCK604L2
- Fully charging batteries takes less than 60 minutes.
- There’s a handy bit storage compartment.
- A three-year limited warranty is included.
- The magnetic driver holder might use some work.
- According to some users, the drill is a little louder than the others.
- The battery life can be a letdown at times.
The Final Verdict
It’s time to make a decision after reading through our Porter-Cable cordless drill review The PORTER-CABLE PCCK604L2 20V Max Lithium-Ion 2-Tool Combo Kit is here for you if you need anything for drilling and impact drilling.
This impact driver is affordable, making it a great alternative for individuals on a tight budget who want something of high quality. This package includes two 20-volt batteries, so you won’t have to buy them separately. As a result, you get a lot of bang for your buck.
