Are you thinking of buying an automated robot to clean your glass doors or windows? The Ecovacs Winbot 880 Robot Window Cleaner is a clever gadget for the job. It uses strong suction to attach to glass surfaces and cleans muck with its onboard high-elastic squeegees and a 5-layer microfiber cleaning pad.
The robot will clean all 4 corners of your window and repeats the process over each surface 4 times to ensure that the glass is gleaming. Sounds good?
Ecovacs has fitted their Winbot with a feature named WIN-SLAM™ 2.0 which cleverly guides the robot across windows using the most efficient method by calculating the best route and steering clear of obstructions. The gadget is also smart enough to go back to its starting point, therefore, you can place it in a low area, send it to higher sections and it will return back to the starting point where you can safely reach for it.
The Winbot 880 comes with a cutting-edge system to detect edges, which means that the robot can detect unframed and framed glass, it will then adjust its course and avoid falling off an edge or bumping into something.
Onboard the Winbot is 2800Pa of suction power, a safety tether (in the unlikely event that the robot falls), a load-bearing suction cup, and a backup battery that lasts half an hour. The joint effort of each accessory provides a safe window cleaning experience. A remote control is provided to instruct the robot when to commence or end a job, direct it to a certain area of the window or change the direction altogether.
Ecovacs Winbot 880 Full Product Review
The Winbot 880 Cleaning Process
The Winbot 880 takes things a step further over its predecessors by offering a four-stage process when cleaning glass. The robot diligently passes each part of the window four times to make sure that it is immaculately clean. For this, it uses 2 squeegees along with the integrated microfiber pads. It never misses a spot.
To start off, the robot applies some detergent on the cleaning pad, it then begins to wipe the surface with the damp pad to scrub to moisten dirt sat on the window.
From there, the first squeegee takes over and begins the process of wiping away the loosened dirt. The second squeegee gives a double dose of cleaning to tackle any remaining bits of dirt that are tougher to remove. At the last stage, the dry section of the cleaning pad begins wiping the window dry and the result is a gleaming window.
Prior to cleaning, the little robot starts off by assessing the window to determine its size and work out the optimum cleaning route. Onboard are a bunch of sensors to cleverly map out the area and help the robot to navigate smoothly across windows while steering clear of obstructions such as window frames. Once cleaning is complete, the Winbot goes back to the original beginning point and it wait there until you come to collect it.
Ecovacs Winbot 880 Features
Product weight: 3.96 pounds
Route Guidance: Path planning technology
Cleaning Accessories: 5-layer microfiber pad & Squeegees
Sensors: Edge detection technology
Multiple safety systems included: High elastic rope, load-bearing suction cup, 2800PA suction power, 30-minute backup battery
As you can probably tell by now, the Winbot 880 is a great time-saving gadget that provides convenience to properties with high glass windows or glass doors. It automates the task of cleaning windows, however, it does have a few drawbacks.
Yes, this robot cleans windows autonomously and does need your input with the actually cleaning process, but it does need you to move it from one window to another. What we’d like to see for future robots is a truly automated experience where you can program it and not need to worry about it until the job is done, however, the problem of a robot moving across two different window frames is rather complicated, therefore, we won’t be seeing this feature for a long time.
My favourite feature has got to be “return to home” which means that when the machine is cleaning a high-reaching area and you’re concerned about how you’re going to retrieve it, this is not a problem because the robot will come back to its original starting point within easy reach.
Is it any good at cleaning windows though? For such a small gadget, the Winbot 880 cleans windows exceptionally well. The machine is thorough and operates at a very low noise level, meaning that you can carry out your usual daily activities without noise disturbances. As with any other robot window cleaner it comes with its flaws, however, it’s a great little resourceful gadget to add to your cleaning arsenal.
The Winbot window cleaner is a high-performance robot, but they are a few things that could be better. For example, it occasionally leaves behind streaks and it can’t be used if the temperature outside is too hot or too cold.
We like that it’s an easy gadget to use and it doesn’t require a complicated setup. The controls are laid out in an easy format so that anyone can learn how to use it very quickly.
To begin, simply position the robot anywhere on the glass surface within easy reach, connect the tether to the safety pod, press start on the remote control and away it goes.
If you are not satisfied with the results of a certain section of the window, simply use the remote to direct the Winbot to the area of concern and it will spot clean the area.
After a task is finished, all you need to do is remove the robot from the window. It comes with a firm handle to safely move the appliance and either place it on a separate window or pack it away.
The machine weighs a little less than 4lbs (1.8kgs) which is on the heavier side for a robot window cleaner, therefore, make sure that you are at a safe and comfortable height when placing or removing it from windows.
Pros
Multiple safety features to keep you and your robot safe.
A thorough 4-stage cleaning process.
Comes with strong suction.
Control your robot with the remote control.
It cleans at a very low noise level to minimize disruptions.
The cleaning pad is washable.
Cons
Pricier than other models.
You can’t use it if the weather is too cold or too hot.
It needs to be move from one window to another, but this is a common issue with all window cleaning robots.
How Reliable Is The Winbot 880?
With the Winbot 880, you can outsource the burden of window cleaning to a robot but how reliable is it? For starters, the Winbot is a well build appliance and outperforms most of the competition.
It combines multiple functions simultaneously to complete tasks to the highest standard. The unit itself is effective at removing dirt, however, on a few occasions it can leave streaks.
Ecovacs is a reliable brand that builds sturdy machines. Their range of robot vacuums are tried and tested, (we love them) and as such, I would expect the same reliability from the Winbot robot. If you encounter any problems, the company has a brilliant responsive customer service team to help with any product issues
Maintaining The Winbot 880
How easy or difficult is it to maintain the Winbot 880? The main 2 items that you need to look after are the cleaning pad and the squeegees. The cleaning pad is washable and can be used repeatedly but will need replacing eventually.
Ecovacs advises that you should wash the pad after each use and leave it to dry out completely before using it again. You should not attempt to turn on the robot with a damp cleaning pad attached to it. The squeegees, side rollers and sensors just need a gentle wipe with a dry cloth after each use.
Try not charge the battery in a room that’s too hot or too cold as this reduces the battery’s lifespan. As mention earlier, try not to use the robot when the weather is really hot, humid or cold.
The robot comes with everything that you need. No extra accessories are required and as such, you can take it out the box and set it up to start cleaning windows straight away.
Similar to rival window cleaning robots, the Winbot 880 is very low maintenance. In the box you will find squeegees and microfiber pads that are washable and reusable.
When extra accessories are required to replace the old ones you can buy them for under $20.
Winbot 880 Frequently Asked Questions
Can the cleaning pad on the Winbot 880 be replaced with a different cloth?
The robot is equipped with a set of customized microfiber cleaning pads specifically for Winbot 880 model. Swapping these with a different non-approved cloth could ruin the robot or reduce performance. You should always use Winbot microfiber cleaning pads. The pads can be washed and used again and again.
Do you need a special cleaning solution for the Winbot 880?
Ecovacs offers a special detergent for the Winbot range, however, you don’t need to use it if you’d prefer to use a different cleaning solution. You can use just water or a standard detergent.
Does Winbot 880 work on angled windows?
Yes, this clever little robot can clean virtually any type of window including angled ones. The Winbot 880 will clean any surface as long as it’s flat. No problem!
Is it okay to squirt my window with detergent or water before attaching the robot?
It’s not advised to attach the Winbot to a wet surface or squirt detergent or water to the window. If you attach the robot to a wet window you risk the possibility of it slipping and getting ruined.
Winbot 880: Our Verdict
The Winbot 880 is a much needed update for Ecovacs given the poor performance of the Winbot 950 and Winbot X. This robot is premium and delivers a high standard of performance to match. The safety features are robust and the “return to home” feature mitigates the need to go retrieve it from areas that are out of reach.
This robot is the perfect addition to a household with tall and wide windows that would either require a ladder or extension tool if you were cleaning them manually.
Setting up the Winbot 880 is a doddle and there’s no high maintenance involved. If you encounter any problems with the 880, the Ecovacs support team are always available and happy to assist you. Overall customer reviews are high and the Winbot 880 is generally well received although the robot is a bit expensive for those looking for an affordable option.
Not a lot of people are aware of the importance of dehumidifiers. Besides comfort, these machines are crucial to keeping areas safe, clean, and smelling fresh. If you have problems with mold and mildew in your establishment or home, getting a dehumidifier can help you solve the dilemma. For first time buyers, it can be confusing to get the right product.
Therefore, here we’ll let you know how dehumidifiers work, and what features you need to check on your purchase. This section will help you understand what is the best commercial dehumidifier for your needs.
When humidity rises in a room, it can cause multiple problems that can affect the establishment’s foundations as well as people’s health. High humid can increase water levels in the air. This situation can result in the development of molds and mildews, which are health hazards.
A humid room may result in wood rot, musty smell, weak infrastructures, water damage, as well as health triggers like allergies or asthma. This is where a dehumidifier can be useful.
Dehumidifiers can set the ideal humidity level of a room. It’s especially useful for places that have been flooded, as areas like this can’t safely and easily dry up without a dehumidifier. These machines can keep your place leak-free, as well as eliminate mold, mildew, pests, while also keeping your area smelling fresh at all times.
Who Needs a Dehumidifier?
Whether for home or business, a dehumidifier can work wonders for any area that’s suffering from too much humidity. As mentioned earlier, a room with unbalanced humidity can cause problems, from simple to serious issues that can be risky to health. Below are some points that might confirm your need for a dehumidifier.
Molds and mildew. If you’ve seen molds and mildews forming anywhere in your home, you must act quickly. These microorganisms can cause serious health risks. Especially for people who are suffering from asthma and allergies, inhaling molds or mildews can cause the lungs to constrict, where breathing can turn more difficult. Mold exposure can also irritate the eye, nose, skin, throat, and lungs.
These molds can even infiltrate the lungs, which can result in the development of lung cavities, which will then lead to diseases like tuberculosis, emphysema, and more. Therefore, in situations you find mold and mildew developing inside your home, getting a dehumidifier as soon as possible is highly recommended.
Rotten Wood. If your home is made of mostly wood, and you’re having humidity issues, getting a dehumidifier is a must. Too much humidity may cause wood to rot easily. If you have expensive wood materials, getting this kind of machine that can keep your home in good condition is needed to protect your investment. A dehumidifier can set the ideal humidity levels in a room, which will prevent wooden materials to rot.
Musty Smelling Areas. No one likes a musty smell. This kind of smell can come from damp areas if you’ve been flooded or there’s too much humidity in the room. You can get rid of this smell using a dehumidifier. Using this machine, damp places can dry out.
If there are developing mold and mildew, which could also cause the smell, a dehumidifier can eliminate these microorganisms. Not only that you can have a space that smells fresh 24/7, you can also get rid of harmful microorganisms.
Pools, Spas, and Hot Tubs. Areas like pools, spas, and hot tubs are always wet. When there’s too much moisture in a room, it can result in a build-up of smell, or molds even fungus. To make sure you keep these areas clean and dry, using a dehumidifier can help you. Especially if it’s your business, it’s important to maintain these areas dry for the safety of the people who come and go.
Gym and Locker Rooms. Gyms and locker rooms are also one of the typical places that are highly humid. Because people gather in these areas, the temperature tends to rise, and with the people’s body heat, it can add to the humidity of the area. Damp and moist, these places can develop an undesirable smell. Therefore, if you want to keep gyms and locker rooms smelling fresh, dry, and safe, a dehumidifier can help you solve your concerns.
Pest issues. Pests like termites, silverfish, centipedes, rodents, or mites can live in wet and damp areas. Therefore, if you won’t solve your area’s humidity issues, pests can take over your place and cause damage to structures. To solve or prevent pests from residing in your place, a dehumidifier is the solution. This machine can keep your place dry and set the ideal humidity level of an environment where pests cannot thrive.
Flooded Areas. If you have experienced getting your place flooded, you know how difficult it is to totally dry the area off. It can result in damp smell, and worse, may even cause damages to the structures of your place. In case your place gets flooded, a dehumidifier can help you sort all the problems that come with it.
Features to Consider
Coverage area
Although most dehumidifiers can cover vast spaces, each model’s coverage area still varies depending on its features and capabilities. To know the specifics of the coverage area you’re looking for, first, know where you will place the machine. Identify the size of the area where you will use the dehumidifier.
When you determined where and what is the size of the area you will use the dehumidifier, you can now proceed on choosing the product for you. When choosing a dehumidifier, make sure the coverage area of the product can serve your needs.
Dehumidifiers can usually cover up to 1000 cubic feet and more. If you’re going to need the machine for commercial use, make sure you’re getting a product that can cover a large space.
Pint Per Day Performance
The dehumidification rate of a dehumidifier is measured in pint per day (PPD). The higher PPD, the more the machine can collect moisture. PPD varies from 70 to 150 or above, and for commercial use, you’d want to opt for a dehumidifier that can gather large amounts of pint daily.
When buying a humidifier, always check the performance rate the product offers. If such information is not available, you can always ask the manufacturer or the seller about it. Furthermore, you may also want to check the temperature range of the dehumidifier you’re getting.
Opt for a brand that can work on low degrees and a wide range of temperatures. This way, you can rely on the product that it will work even if the temperature drops in the area where the dehumidifier is working. You can get the most of what you paid for by choosing a versatile product.
Pump System
There are a couple of ways in which you can expel the collected moisture dehumidifiers gather. Some models have a tank where the water is collected, which is then manually emptied by the user. Some brands are equipped with a detachable hose or a built-in pump. A built-in pump is the best system for expelling water from the machine. Using this feature, collected moisture is disposed of automatically.
A built-in pump can help you save you time and effort as you won’t need to manually empty the machine when the water container turns full. For commercial dehumidifiers especially, having a built-in pump is necessary for convenience.
Heavy-duty dehumidifiers collect a large amount of moisture, and it’s not easy to drain. With this feature, pumps push the collected water into a hose that is directed to a sink or drainage.
Noise is a usual problem encountered with dehumidifier use. Some models can be loud, and you wouldn’t want a noisy machine working in office establishments where people can be disturbed.
Dehumidifiers usually produce noise levels around 50 dB. To make sure you’re getting a product that won’t disturb the people near, opt for a model with two-speed fans. This feature can help reduce the noise, as well as help the machine to operate smoothly no matter what’s the humidity level of a room. Also, quiet models tend to be more energy-efficient.
Portability
Many humidifiers are bulky and weighty especially the ones for heavy-duty work or commercial-use. That’s why you will find models with wheels and handles for easy portability. Choosing dehumidifiers with this feature is convenient and easy to move from one place to another.
You won’t have to worry about carrying a heavy machine from place to place and break you back. Easily portable models can help you save time and energy, too. For individuals with back problems, opting for a dehumidifier with wheels is highly recommended.
Warranty
Dehumidifiers can be costly. It’s just wise to look for a warranty that can protect your investment when getting a dehumidifier. Different models come with a variety of warranty terms. You may choose the warranty that you preferred the most. If you can’t find any detail regarding the product’s warranty, don’t assume it doesn’t have.
You can always ask the company or the seller about the warranty. Almost all dehumidifiers come with this benefit. If you’re going to buy from physical stores, usually the warranty information is automatically disclosed.
Added Features
Check the features of the model you’re planning to get. Product highlights and capabilities won’t only make the dehumidifiers more efficient, convenient, you will also get the most of what you paid for. Therefore, when buying a dehumidifier, look for features like a defrost system or a built-in humidistat.
A defrost system, for instance, allows the dehumidifier to work on high temperatures. With this feature, the build-up of ice on the coils automatically melts. Furthermore, you may also want to check if the product you’re getting come with added accessories. Added tools like cords and hoses are typically necessary for the machines to work efficiently and conveniently.
Not all models come with extra accessories. Meaning, looking for added accessories on your purchase will help you reduce costs as you won’t need to buy the tools separately.
Conclusion
We hope we have provided valuable insights regarding dehumidifiers. If you’re still asking what is the best commercial dehumidifier, you might want to check out our other posts about dehumidifiers. You might find the exact brand and model you’re looking for in those articles. Do you find this post useful on your journey to buying the best dehumidifier? Let us know in the comment section below!
The Roborock E35 robot vacuum mop is another great addition to the brand’s already impressive lineup. On offer is a high-performance cleaner at a lower price point than premium robots such as the Roborock S5, for those after a bargain. The E35’s lower cost is one of the biggest advantages of this unit because you get similar features to the pricier robots, making this gadget good value for money.
What are some of the functions that you can expect to find on the Roborock E35? There’s a set of advanced motion tracking sensors that work alongside a dual-gyro system so that the robot can carry out its tasks using the most efficient routes that it can calculate. The machine is fitted with 13 different sensors to help avoid obstructions and stay away from stair edges.
For a unit this small, it has one of the longest battery running times on a robot vacuum, lasting for up to 2 hours 30 minutes. When the robot detects a low battery it promptly returns back to its dock automatically and charges up. Not only does it vacuum, it can mop too. The suction power is impressive, delivering 2000Pa. This is all made possible by the high-grade 5200mAh battery fitted inside.
Not so long ago, if you were considering switching to a robot vacuum cleaner and wanted a high-performance model, you had to rely on traditional brands such as Dyson or Roomba. The issue here was that the robots offered by these longstanding brands were too expensive and most people simply couldn’t afford them.
A lot has changed since then. The market is now flooded with plenty of choices and as a result, you are not limited to the high-end brands. It’s now possible to source a high-performance robot that is good value for money, like the Roborock E35.
It cleans just as good as the iRobot or Botvac range and in some cases, it even outperforms some of the branded models. It’s equipped with premium functionality such as remote app control, clever route planning and recharge & resume from where it left off.
The majority of E35 users absolutely love this little guy. One of the most talked-about features is the strong suction which makes this robot ideal for pet owners.
The long 2 hours 30 minutes running time means that the Roborock spends more time cleaning your floors and less time at the charging station. There’s plenty of time for it to vacuum several rooms on a single charge even in bigger properties.
Having said that, The Roborock E35 does have some drawbacks, for example, it doesn’t perform as good on thick carpets.
Controlling Your Roborock E35
The robot can be controlled remotely from your smartphone via the Mi Home App. Inside the app, you can set up specific cleaning times that fit in with your daily schedule, and you can keep an eye on the progress of the robot. It increases the suction power when it detects carpets, however, as mentioned earlier, it has a difficult time coping with cleaning thick-pile carpets.
The Roborock E35 can be linked to Alexa gadgets or Google assistant, thus providing the user with the convenience to control the robot vacuum with voice commands. You can say something like “Alexa, switch on Roborock”.
Filtration
Thankfully, the unit is fitted with tangle-free brushes so that pet hair can be swept up without causing more work for you. Surprisingly the robot is also equipped with HEPA filtration for allergy sufferers, the machine is capable of capturing over 99.9% of microparticles which is a great feature to help those with asthma or seasonal allergies such as hay fever.
It comes with one of the best suction performance on a robot vacuum.
It can be controlled remotely via the smartphone app.
The robot is compatible with Alexa or Google Assistant for voice commands.
Cheaper to buy than premium models yet it offers similar features.
You can setup preferred cleaning times depending on your daily routine.
Cons
Struggles to clean thicker carpets
No floor mapping
Roborock E35 Cleaning Performance
Just because the E35 costs less than Roborock’s premium offerings doesn’t mean that the cleaning performance is of a lower standard. The machine delivers a superb cleaning experience and many users are singing its praises.
The 2,000Pa suction power enhances the robots ability to lift dust and dirt from various floor types.
As mentioned previously, the E35 is an excellent pet hair cleaner and is a very cost-effective solution for pet owners looking for a way to keep animal hair under control.
The dirt bin’s capacity is 640 ml which is large enough for the robot to complete its cycle, even in medium to large sized homes before it needs emptying.
Another smart function is the dual exhaust system which distributes air evenly over a wider space. The majority of robots only come with one exhaust which tends to blow dust and dirt all over the place.
Sadly, the high suction power on the E35 doesn’t seem to be enough to thoroughly clean thick carpets. Instead, the Roborock provides optimum performance on thinner carpets. Make sure that the carpet boost cleaning mode is turned on. The robot can be used on thicker carpets, however, you will need to top this up by manually cleaning with a stronger vacuum every now and again whenever you need to deep clean your carpet.
I would not recommend the Roborock E35 on extra-thick carpets or shaggy rugs as there’s a high chance that the robot will get tangled with the long carpet fibers.
When cleaning hard flooring such as tiles, laminate or wooden floors, the E35’s performance matches that of pricier units such as the iRobot.
Dirt that is lurking in corners or the edges of the room will be swept up by the onboard side brushes. The roller brush loosens tougher dirt and pushes it into the machine.
It’s good to know that there’s plenty of suction power for hard flooring. You can actually reduce the suction to the lowest setting and the machine will still perform an outstanding job on hard floors.
The sizable 640 ml dirt bin is one of the biggest that’s found on a robot vacuum cleaner. The HEPA filter does an excellent job at trapping dust and airborne allergens, ensuring that they are sealed inside the bin.
Roborock E35 Robot Vacuum Cleaner Specs
Machine weight: 7 pounds
Motion tracking sensors/ Dual-gyro system
13 sensors including proximity and cliff sensors
Battery time: 2 hours 30 minutes
Battery capacity: 5200mAh battery
Battery recharge: Auto recharge & resume
Suction power: 2000Pa
Smartphone app: Mi Home App
Cleaning mode: Spot Cleaning/boost suction mode for carpet
Tangle-free brushes
HEPA filter comes as standard
Filters are washable
Connects to home WiFi for remote control
Can be linked to Amazon Alexa devices and Google Assistant
The mopping function is easy to set up. All you need to do is switch the dirt bin with the mopping accessory, comprising of a removable pad and a water tank.
Water is dispensed from the tank via small nozzles, it’s designed in such a way that the robot does not leave pools of water across your flooring. Rest assured that your floors will be mopped effectively and safely.
One thing to watch out for is stubborn dirt such as dried up food stains, the E35 does not scrub floors. You will need to manually scrub away tougher food bits separately.
The Roborock gently mops away the dust sitting on your hard flooring. You can also use it to clear recent spillages.
Roborock E35 Cleaning Modes
You can choose between different cleaning modes such as balanced, quiet, turbo, max or carpet cleaning mode. Simply use theMi Home app for this. The suction power is adjusted accordingly depending on the chosen mode.
If quiet mode is selected, the robot will drop the suction power to the lowest setting to minimize noise. The highest setting is the max mode which delivers a thorough clean. If the carpet mode is selected, the robot will cleverly amplify the suction whenever it transitions from a hard floor to carpet.
The battery running time heavily depends on the chosen cleaning mode. At the lowest setting (quiet mode) the robot can run for 2 hours 30 minutes which is the maximum running time.
You will need to choose the mop setting whenever you need to mop your floors.
To clean isolated bits of mess simply press the spot mode button found on the machine.
How Good Is The Navigation?
Robot vacuums in the same price bracket as the Roborock E35 often vacuum randomly but this is not the case with the E35. It navigates in an obvious pattern across the room until it has covered the whole area.
If it detects an obstacle, the robot glides around the obstruction and continues on its route. The robot also takes advantage of its slim profile to travel underneath furniture such as sofas, cabinets and bed frames.
The E35’s intuitive navigation is fitted with 2 gyroscopes, infrared sensors and optical motion tracking sensors which all work together to give it the best possible path guidance.
The robot familiarizes itself with its surroundings and can notice upcoming obstructions. It will halt and turn around when it gets close to stair edges.
The good thing about the E35 is that you don’t need to move around the furniture or fragile items. If it does bump into an item, it does so very gently. The robot is fitted with a bumper that absorbs impacts and makes sure that your valuable furniture is not scuffed.
The intelligent navigation system and long-lasting battery allow the Roborock to vacuum or mop your whole house trouble-free, navigating into multiple rooms without losing its way.
The only improvement that I’d like to see is the addition of floor mapping technology which is available on the higher-end models such as the S5. Without this feature, you cannot send the robot to clean a specific room or set up virtual barriers for areas that are out of bounds.
One feature that we were pleasantly surprised to see was the auto-recharge & resume function that is usually found on costlier premium units.
The majority of robot vacuum cleaners only come with an auto recharge feature, whereas the Roborock E35 is capable of returning to its charging station, when the battery power has depleted to 20%, and will commence vacuuming where it left off when the battery has charged up.
To connect the E35 to your WiFi network simply download the companion app and use it to link to the robot. From there you can control the robot through the app, start a cleaning cycle, choose a cleaning mode, send the E35 to its charging station or set up an automatic cleaning routine.
If you prefer voice prompts, the Roborock E35 can be controlled with Amazon Alexa devices or Google assistant.
Roborock E35 is Great for
Getting rid of pet hair
Wooden flooring
Tiled floors
Linoleum floors
Vinyl floors
Thin carpets
Mopping
Cleaning multiple rooms
Medium & Large-sized properties
Avoid Roborock E35 if
Your home is mainly carpeted or if you have plenty of thick-pile carpets. The Roborock E35 excels at cleaning thin carpets/ rugs and hard flooring.
If you’re having serious humidity and flood issues at your home or establishment, you will love the AlorAir Basement Crawl Space dehumidifiers. This product works like magic as many customers claim. Apart from keeping your space smelling fresh, this machine can also help maintain the sturdy foundations of a building. It can be expensive, but it’s worth the price. Learn more about this AlorAir dehumidifier especially made for basements and crawl spaces by reading on.
Summary of Features: AlorAir Basement Crawl Space Dehumidifier
Hot Gas Valve Defrosting System. The product’s Hot Gas Valve Defrosting System doesn’t only help reduce energy costs, it can also prolong the unit’s lifespan and keep it in good condition. It’s a noteworthy feature, which allows the dehumidifier to work continuously without periodic stopping.
Works at low temperatures (36 degrees Fahrenheit). Due to the product’s HGV defrost system, the humidifier can work on a wide range of temperatures even as low as 36 degrees Fahrenheit.
Internal Corrosion Protection. This feature protects the coils from corrosion and leakage. It also improves the capability of the coils to transfer heat.
Epoxy coated. The AlorAir Basement/Crawl Space Dehumidifier is equipped with epoxy coated coils. This feature prevents Freon leakage, prolongs the lifespan of the coils, and improves its ability to transfer heat.
Continuous Drain Hose. The continuous drain hose allows the machine to work non-stop even up to 24 hours. All you need to do is set your ideal humidity and the model will do its job on its own.
G3 Filter. The efficient G3 filters of the AlorAir Basement/Crawl Space dehumidifier helps in absorbing moisture and removal of odor from the space you want to use the dehumidifier.
130 CFM, 230 CMH. CFM and CMH are two crucial factors to know about the humidifier you’re getting. These features mean the amount of moisture the machine can get from the air, and with 130 CFM, 230 CMH, the AlorAir Basement/Crawl Space, boasts great performance.
52 dB(A). At 52 dB, the machine produces low levels of noise. It’s a favorable feature as you won’t need to worry about disturbing other people when using the dehumidifier.
Functioning Temperature Range: 33.8~104 degrees F. It’s important to get a dehumidifier that can work on a wide range of temperatures. With these numbers, it means the machine can still be efficient even if you use it at low temperatures.
Functioning Humidity Range: 35~95%. Just like temperature, you’d also want to get a dehumidifier that can be efficient on a wide range of humidity. When it comes to this factor, the AlorAir Basement/Crawl Space won’t disappoint.
57.3 pounds in weight. For a dehumidifier that is usually moved from one place to another, 57.3 pounds is a weight that won’t break your back.
120 PPD (Saturation). 120 PPD at saturation is a decent performance both for home and commercial use.
55 PPD (AHAM). AHAM at 55 PPD is another positive capability of the AlorAir Basement/Crawl Space. Although you might find other dehumidifiers that offer a higher performance rate, 55 PPD is more than decent for a compact dehumidifier fro basement and crawl spaces.
5 Years Warranty. AlorAir offers a generous warranty of 5 years. Meaning, you can protect your investment as this device doesn’t come cheap.
Remote Control. You have an option to control the dehumidifier using a remote control, which might be a simple feature but you will find handy in many situations.
AlorAir Basement Crawl Space Dehumidifier Review
We’d say if you have problems with molds and mildew, a dehumidifier is a necessary purchase. These microorganisms can be detrimental to health. The question is, what if you just want your space to stay smelling fresh and flood-free? Yes, a dehumidifier is still the product that can help you with your needs. We’re not here to convince you to purchase an AlorAir Basement Crawl Space dehumidifier, we’re here to unveil the strengths and drawbacks of this product, and for you to know if this is the model you’re looking for.
First, let’s discuss the design. The AlorAir Basement Crawl Space Dehumidifier is straight to the point, simple and compact. With dimensions 19.2×12.2×13.3 inches, it can fit into small areas like crawl spaces. Physical buttons are available for use on the unit, but you can also set your ideal settings using the remote control. Two handles are conveniently located on top of the unit for easy carrying as well.
When it comes to performance, the AlorAir Basement Crawl Space Dehumidifier boasts 120 PPD (Saturation) and 55 PPD (AHAM). These numbers are higher than the average, which backs up the fact that this product can work great both for homes and commercial places. The wide temperature range of the model is also another great factor, as it can work from 33.8 to 104 degrees F. It’s a crucial benefit for dehumidifiers as you’d want a product that can work despite the levels of temperature when humidity can be affected by the environment’s Celsius and Fahrenheit.
The defrost system of the AlorAir Basement Crawl Space Dehumidifier is impressive, too. The model boasts a Hot Gas Valve Defrosting System which doesn’t only help save energy costs, it can also prolong the unit’s lifespan and keep it in good condition. This feature also allows the dehumidifier to work continuously without periodic stopping.
Another feature we like is the Internal Corrosion Protection, which protects the coils from damages and leakage. This highlight also improves the capability of the coils to transfer heat. With epoxy coated coils, the machine is prevented from having Freon leakage. It also prolongs the lifespan of the coils and helps the coils become more efficient in transferring heat.
The AlorAir Basement Crawl Space Dehumidifier can work non-stop with its feature, Continuous Drain Hose. With this, you can conveniently set your ideal humidity and let the dehumidifier be on its own and work for 24 hours. The model has no tanks as well, which means you won’t worry about emptying the water reservoir, as it just drains the collected moisture automatically.
The AlorAir Basement Crawl Space Dehumidifier is an excellent product that comes with many perks supporting its efficiency and convenience. However, it might be for you if you have a tight budget as it can be costly. It also lacks wheels which could’ve improved the machine’s portability.
For commercial use. With performance rates 120 PPD (Saturation) and 55 PPD (AHAM), we’d say the AlorAir Dehumidifier offers great potentials for commercial use. Average dehumidifiers, especially the models for home use provide lower performance rates than what this unit can give. Meaning, this model can be a great fit for a dehumidifier both for small and large spaces.
For moldy spaces. With a powerful machine and high-performance rate, the AlorAir Dehumidifier can help you solve your mold problems in your crawl spaces and basements whether in business establishments or your house. Molds can be harmful to health, which means, getting a good dehumidifier is necessary to keep people who come and go in the establishment to remain safe at all times.
For rotten-smelling areas. No one likes smelly places, and everyone likes fresh-smelling spaces. A musty or rotten smell can come from mold and mildew, which doesn’t only affect your peace and feeling of ease and comfort, these microorganisms can also lead to sickness, which we all want to avoid.
For busy people. With the product’s features that allow the model to work on its own with less monitoring, it can be a great option for people who are living a busy lifestyle. With this AlorAir Dehumidifier, you can preset your ideal humidity, and let the machine work on its own non-stop for as long as 24 hours. If you’re a busy person, this is a highly convenient highlight for you as you won’t have to worry about monitoring the dehumidifier at all times.
For keeping your place safe. As mentioned, this dehumidifier is efficient and versatile. You can be at ease and keep your space safe from mildew and molds with the use of this humidifier. It offers convenience as well as efficiency when it comes to keeping your place free of harmful microorganisms like molds and mildew. When it comes to efficiency in dehumidifying a space, you can rely on AlorAir Basement Crawl Space Dehumidifier that it can do its job.
AlorAir Basement Crawl Space Specs
Hot Gas Valve Defrosting System
Can work at low temperatures (36 degrees Fahrenheit)
Below are the Pros and Cons of AlorAir Basement Crawl Space
Pros
Compact
Silent
Wide temperature range
Hot Gas Valve Defrosting System
Internal Corrosion Protection
Cons
Expensive
Lacks wheels
Conclusion
We hope we have provided valuable information about AlorAir Basement Crawl Space Dehumidifiers. This product might be expensive but most consumers agree that it’s worth every cent. When people’s safety is at risk, you won’t need to doubt about buying a product that can give you peace of mind. The AlorAir Basement Crawl Space Dehumidifiers won’t only keep your place safe but also smelling fresh at all times. With a great rate performance, easy drain features, 24-hour continuous work, and many other highlights, we’d say we can agree with the satisfied customers that bought this product. If you liked the information we shared here, please let us know in the comment section below. We’d love to hear from you!
If you’re looking for a commercial humidifier to help you with your problems with mold, mildew, and musty-smelling space, you may want to know more about the Alorair LGR Compact Dehumidifier. This model may look compact but it boasts a couple of impressive features for such a small unit.
A wide temperature range, efficient defrost system and a pump system are just a few of the qualities you can look forward to this product. However, it still lacks a few strong points, which could’ve made the product better. Read on to know more about AlorAir LGR Dehumidifier.
190 PPD at Saturation. 190 PPD is a high-performance rate for a humidifier. It means the machine can gather large pints a day, which is a positive highlight for a commercial humidifier.
Digital humidistat control. The digital humidistat provides great convenience for you to monitor the machine inlet and outlet. You can also see from here the GPP number and current operating system the machine is in.
Timer. The timer allows you to pre-set the dehumidification schedule you desire that you can control after your preference. This feature gives your freedom for setting the machine to work anytime you want.
Condensate Pump. The pump is another highlight worth mentioning, as not all models offer this feature. A pump offers great convenience especially for commercial humidifiers that can gather a lot of moisture.
Fits into small spaces. With small dimensions of the unit’s body allows the product to fit in small spaces, which means you can also use it for crawl spaces and basement with limited space.
33-105 degrees F temperature range. Offering a wide temperature range, you can rely on the AlorAir LGR Dehumidifier to work whether the environment’s temperature is high or low.
85 PPD (13.4 gallons) capacity. 85 PPD is another great strength of the AlorAir LGR Dehumidifier. For average dehumidifiers you can see 35-50 PPD, meaning, 85 is a positive advantage especially if you’re going to need the model for heavy-duty tasks.
Waterproof. The AlorAir LGR Dehumidifier is a waterproof model, which is beneficial since these devices are typically exposed to water. In case leaks happen, you won’t worry about the product getting damaged.
5 Years Warranty. 5 years is a generous warranty for a humidifier that doesn’t come cheap. When buying products like this, it’s important to look for a warranty that can protect your investment.
“Hot Gas” defrosting system. A defrost system is a necessary feature to look for commercial humidifiers. This highlight won’t prolong the lifespan of coils but also adds efficiency for dehumidification.
Epoxy coated coils. Epoxy coated coils is another positive feature, which protects the coils from being damaged easily.
Turn On/Off Automatically. The AlorAir LGR Dehumidifier turns off and on when it reaches the ideal humidity of the environment, which means less monitoring and less worrying on your part.
78 pounds. For a commercial humidifier, 78 pounds is a decent weight, which means it can be moved from one place to another without too much effort in addition to the handles the model has.
AlorAir LGR Dehumidifier Review
The AlorAir LGR Dehumidifier is created for professional use. It may look small and simple but it boasts great features. The main highlights of this product are the 190 PPD (saturation) and 85 PPD (AHAM). This means the AlorAir LGR Dehumidifier can gather great amounts of pints daily, which is perfect for commercial use.
Another feature is a condensate pump which makes emptying of the water reservoir convenient. You will have the freedom to drain water anywhere with this pump that has a 20’ lifting distance capability. When it comes to design, overall the unit is compact and waterproof.
The base of the product has a rubber strip that seals the circuit board and protects it in case of a flood. We also like to mention the washable filters, MERV 8. In addition to this, other accessories of the AlorAir LGR Dehumidifier are replaceable. Furthermore, the shape of the unit is purposely made to be stackable. It saves a lot of space, and easy to store.
The AlorAir LGR Dehumidifier comes with a lengthy 19-foot cord, which you can easily and neatly store on the side of the unit. This long cord allows you to place the dehumidifier anywhere far from the socket. It’s also worth mentioning that the model boasts epoxy-coated coils. This feature doesn’t only protect the coils and prolongs its lifespan, it also improves the coil’s ability to transfer heat.
Dehumidifiers must be able to work on a wide range of temperatures. The AlorAir LGR Dehumidifier has this feature, as it can be efficient in dehumidifying at temperatures 33-105 degrees F. Having a defrost system is another positive feature of this dehumidifier. Its “hot gas” defrosting system assures efficient and fast clearing out of ice as long as the temperature doesn’t go lower 2-degree C.
The product’s LED display allows easy monitoring of the humidity as well as the GPP number. It also displays the operating settings the model is currently on. You may also find the dehumidifier’s timer useful especially when you’d have to leave the space and let the model do its work. With the timer, you can preset the schedule of dehumidification, and just leave the machine work on its own at the scheduled time.
The AlorAir LGR dehumidifier boasts many perks. It comes with a 5 Year Warranty, too, to protect your investment. However, having wheels would’ve made the unit more portable and easy to move around. The price tag may also not sound very enticing if you’re on a tight budget.
For people looking for a compact dehumidifier. If you’re looking for a compact dehumidifier, the AlorAir LGR Dehumidifier is a good choice. You can place this machine in tight spaces like the basement or crawl space. With dimensions 14.7 ft. for the drain height and the drainpipe in 19.6 ft., it’s small enough to be easily stored as well as use in limited areas. The unit is designed to be easily stackable, too. Meaning, it won’t cost you a lot of storage space even if you buy two or more units.
For commercial use. With an impressive performance of 190 PPD (saturation) and 85 PPD (AHAM), the AlorAir LGR Dehumidifier is a good choice for commercial use. It can cover a large area as well, which is perfect for commercial spaces and establishments. Compared to dehumidifiers that can offer about 30-50 PPD, the AlorAir LGR Dehumidifier has an edge when it comes to performance and coverage area.
Convenience. The AlorAir LGR dehumidifier offers several conveniences. It’s an efficient compact machine that can help you with problems about molds and mildew that can be detrimental to health. It comes with multiple features that improve its convenience such as its pump and defrost system. It also has an easy touch control panel with LED monitor to show the status of the dehumidifier’s work.
Moldy areas. If you want to get rid of mold in your area or want to prevent it from happening, the AlorAir LGR dehumidifier is the device that can help you with it. You can place this machine in both large and small spaces with its compact body. With a high capacity of PPD at AHAM and saturation, you can rely on this product to work on both home and commercial use.
Musty-smelling spaces. The AlorAir LGR dehumidifier can eliminate the musty smell in your basement or crawl space. As it resolves the humidification issues in an environment that results in the musty smell, this machine can help your space smelling fresh at all times.
Powerful dehumidifier. As mentioned, the AlorAir LGR dehumidifier boasts 190 PPD (saturation) and 85 PPD (AHAM), in exchange for just 5.4 amps on a 115V power supply. With these numbers, it just shows that this dehumidifier is energy efficient.
For busy people. The AlorAir LGR dehumidifier is a great dehumidifier for people who are living a busy life. With its timer, you can preset the dehumidification process that you aim to happen in a particular area. This machine also has an automatic turn on and off, which means it turns the power on to reach the ideal humidity and turns the power off when that level of humidity is met.
Below are the pros and cons of AlorAir LGR Dehumidifier
Pros
Compact
Defrost system
Epoxy coated coils
Built-in pump and humidistat
85 PPD
5 Year Warranty
Cons
Lacks wheels
Expensive
Conclusion
The Alorair LGR Compact Dehumidifier is one of the most competitive models today for commercial use. The performance rate and the coverage area of the machine are just a few of the factors that back up its capabilities. However, it still lacks a few features that may turn you off. Overall, we think this product is a good buy for an efficient dehumidifier. It can help you keep your space smelling fresh and safe from mold and mildew. If you think we have provided valuable insights regarding this product, or your need to find a good commercial dehumidifier, let us know in the comment section below. We’d love to hear from you!
